Saturday, July 24, 2010
Reset Belkin N Wireless Router
Push and release the “Reset” button. The lights on the Router will momentarily flash. The “router” light will begin to blink. When the “router” light becomes solid again, the reset is complete.
Restore Belkin N Wireless Router to factory default
While power is on, press and hold the Reset button for at least 10 seconds, then release the Reset button. The router light will begin to blink. When the router light becomes solid again, the restore is complete.
Belkin N Wireless Router Status Display
OFF - Wireless security is off
Solid Blue - Wireless security is on
OFF - Wireless computer is not present
Solid Blue - Wireless computer is connected to the Router
Blinking Amber - Problem with wireless computer connecting properly to the Router
OFF - Wired computer is not present
Solid Blue - Wired computer is connected to the Router
Blinking Amber - Problem with wired computer connecting properly to the Router
OFF - Router is off
Blinking Blue - Router is booting up
Solid Blue - Router is on and ready
This icon lights in blue to indicate that your modem is connected properly to the Router. It turns amber when problem is detected.
OFF - Router is NOT connected to modem
Solid Blue - Router is connected to modem and functioning properly
Blinking Amber - Problem with modem
OFF - Router is NOT connected to the Internet
Blinking Amber - Router is attempting to connect to the Internet
Solid Blue - Router is connected to the Internet.