Ruckus Wireless Default IP address, Username, Password and User Guide

bybudzer •
Default Username, Password, IP Address and User Guide for ZoneDirector and ZoneFlex

Ruckus Wireless ZoneDirector:
ZoneDirector 1000
ZoneDirector 1100
ZoneDirector 3000
IP address: 192.168.0.2
subnet mask: 255.255.255.0
No default username and password after reset
ZoneDirector User Guide

Ruckus Wireless ZoneFlex:
ZoneFlex 7731 802.11n Wireless Bridge
The default IP addresses for the Root and Non-Root Bridge are as follows:
Root Bridge: 192.168.2.1
Non-Root Bridge: 192.168.2.254
Subnet mask: 255.255.255.0
username: super
password: sp-admin
ZoneFlex 7731 Getting Started Guide

Ruckus Wireless ZoneFlex:ZoneFlex 7025 Multimedia Wi-Fi Wall Switch
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
username: super
password: sp-admin
ZoneFlex 7025 User Guide

Ruckus Wireless ZoneFlex Access Point:
ZoneFlex 2942 802.11g Access Point
ZoneFlex 2741 802.11g Outdoor Access Point
ZoneFlex 7942 802.11n Access Point
ZoneFlex 7962 Dual Band 802.11n Access Point
ZoneFlex 7762 Dual Band 802.11n Outdoor Access Point
ZoneFlex 7762-S Dual Band 802.11n Outdoor Sector Access Point
ZoneFlex 7343 2.4GHz 802.11n Smart Wi-Fi Access Point
ZoneFlex 7363 Dual Band 802.11n Smart Wi-Fi Access Point
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
username: super
password: sp-admin
ZoneFlex User Guide
Tags

25 Comments

  1. GauravAugust 3, 2011 at 7:27 AM

    plz tell me default gateway for ruckus 2211 metro broadband gatewa

    ReplyDelete
  2. GauravAugust 3, 2011 at 7:29 AM

    tell me how to change SSID and enable PSK in Ruckus 2211 Metro Gateway Broadband

    ReplyDelete
  3. AnonymousAugust 27, 2011 at 4:00 PM

    http://10.6.134.173/login.asp

    ReplyDelete
  4. UnknownJuly 23, 2012 at 5:28 PM

    hi all im a new come to rukus and need help seting up a wireless hotspot how is it i do a hard reset on AP and i still can not get in, im thinking it might be a configuration on the switch, can some one help

    ReplyDelete
  5. UnknownNovember 23, 2012 at 11:22 PM

    why can not enter the ip default settings lord, how true?

    ReplyDelete
  6. AJAY RAIOctober 10, 2013 at 11:47 AM

    what is the admin user id or pass in ruckus zoneflex 2741 AP. in use tikona isp own user id or pass

    ReplyDelete
  7. AnonymousNovember 25, 2013 at 6:59 AM

    plz tell me rukus MF7211 USERNAME & PASSWORD

    ReplyDelete
    Replies
    1. AJAY RAIDecember 23, 2013 at 12:19 PM

      User Name...TikonaSUCPE
Pass..1WaItWa^ItW1


      Delete
  8. AJAY RAIDecember 23, 2013 at 12:28 PM

    TikonaSUCPE
    
pwd...1WaItWa^ItW1


    ReplyDelete
    Replies
    1. AnonymousMay 17, 2019 at 3:33 AM

      password is not clear to understand!!

      Delete
  9. AJAY RAIDecember 23, 2013 at 12:29 PM

    Contact me for pass... 09310020060

    ReplyDelete
  10. deepakMarch 27, 2014 at 2:14 AM

    how can we connect ruckus wireless zone diretor zd1000 with pc

    ReplyDelete
  11. AnonymousApril 24, 2014 at 3:09 AM

    Ruckus wirless M2211 I have reset the devise but not accept User Name and Password and I have given default user name admin password Password but not accept the Password what is the problem

    ReplyDelete
  12. AnonymousJune 19, 2014 at 5:58 PM

    Can anyone help I have a Zoneflex 7363 and even after using the factory default reset cannot log into it using the default "super" and "sp-admin" that is in all the manuals and every website i have found, anyone have any others that might work its doing my head in now LOL

    ReplyDelete
  13. AnonymousJuly 4, 2014 at 4:34 PM

    I also cannot log into my Ruckus 7363 even after factory resetting the AP. I tried using "super" and "sp-admin" without any success. Any ideas?

    ReplyDelete
  14. AnonymousJuly 4, 2014 at 9:12 PM

    ^^^

    I was finally able to login to the web managament interface. I did a hard (30-30-30) reset on my the AP. Below is from an article on Lifehacker

    "Do a hard (30/30/30) reset on your router: A "hard" reset, or a "30/30/30," means locating the reset notch on the back of your router, then inserting a pen and holding it there for a total of 90 seconds—30 seconds at first with the power on, then yank the power cord and wait another 30, then plug the power cord back in and wait 30 seconds, all while still holding the pen. It seems a bit excessive, but trust me—I've had friends with electronic engineering skills explain just how finicky, and sometimes random, physical memory chips like those in routers can be at holding their settings or otherwise not completely blanking out."

    ReplyDelete
  15. AnonymousMay 15, 2015 at 2:11 PM

    Wow, that actually worked. I would have never guessed that in my lifetime. (30/30/30)

    ReplyDelete
  16. Manit MalhotraOctober 7, 2015 at 10:17 AM

    Guys can u tell me.. aft 30/30/30 ..what is login details, i mean username and password?

    ReplyDelete
  17. kamranSeptember 10, 2016 at 11:21 AM

    Guys can u tell me.. aft 30/30/30 ..what is login details, i mean username and password?

    ReplyDelete
  18. kamranSeptember 10, 2016 at 11:23 AM

    Guys can u tell me.. aft 30/30/30 ..what is login details, i mean username and password?

    ReplyDelete
  19. AdminMay 9, 2017 at 10:44 PM

    Internet router login ip like 192.168.0.1 can be accessed by entering the ip address directly on the browser.

    ReplyDelete
  20. 192.168.1.254January 5, 2018 at 9:32 PM

    Nice post Thanks for sharing this awesome post This New Year

    ReplyDelete
  21. Linksys router loginMay 3, 2018 at 1:41 AM

    nice blog with valuable information...
    Linksys Login

    ReplyDelete
  22. Sophia MillerApril 29, 2021 at 5:15 AM

    Nice Blog Post thanks for sharing it.

    enable wireless radio tp link
    TP-link Support

    ReplyDelete
  23. MarionnOctober 8, 2023 at 9:32 PM

    görüntülü show
    ücretlishow
    M7QUİS

    ReplyDelete
Previous Post Next Post
Share to other apps
Copy Post Link

Contact Form